Skip to main content

Complete series of Longyear diamond drilling bits now available

Published by , Editor
Global Mining Review,

Boart Longyear has announced the complete series of its Longyear™ diamond drilling bits is now available.

The complete Longyear Diamond Bit Series includes a Red, Orange, Yellow, Green, Blue, and Purple Bit for a wide range of drilling conditions and ground formations, with each colour corresponding to specific hardness ratings found on the standard Mohs hardness scale. A complete rating and comparison chart can be found at:

“Drillers want to know, which bit to use, how fast will it cut, and how long will it last?” said Chris Lambert, Senior Product Manager. “The new Longyear Bits simply cut faster (right out of the box) and last longer. The new line of colour coding is meant to make it easier to select and use bits for every type of ground condition and for every driller experience level.”

After the initial launch of the Longyear Green Bit in November 2017, trials of additional colours in the series of diamond drilling bits have proven successful. Drill crews in Australia tested several Longyear bits including Green, Yellow, and Red Bits over a three-month period after adoption. The combined result of these tests showed a 60% improvement over the competition, a full doubling in penetration rate, and placed 23% more core in the box.

"The new Longyear bits cut faster and last longer,” Robert Jex, Division Manager of US North Coring explained. “These two qualities in a bit are hard to come by. Usually, a bit that cuts faster gets used up faster – which means more tripping to change the bit. The new Longyear bits seem to have the right balance. It’s important to select the right bit for the type of rock encountered. Longyear bits make that easier to do. I highly recommend the new Longyear bits – they have improved penetration rates, productivity and outlast any other bit I’ve used."

To date, drilling crews utilising Longyear bits improved shift performance, time down the hole, and metres drilled, ultimately placing more core in the box. As a result of successful testing in both underground and surface coring environments, the complete line of new Longyear diamond drilling bits is now available to drilling companies throughout the world.

Read the article online at:

You might also like


Embed article link: (copy the HTML code below):


This article has been tagged under the following:

Mining equipment news